Wider is Better! H&R TRAK+ Wheel Spacers provide simple and effective vehicle track widening for improved handling, performance, safety, and a ‘perfect stance’. Featuring a ‘perfect fit’ hubcentric design, TRAK+ Wheel Spacers are extremely durable and lightweight thanks to a proprietary aluminum/magnesium alloy.
DRS Series spacers fit between the wheel and hub, and require exchanging the existing wheel studs for longer ones (studs are included).
| Make | Model | Chassis | Years | Spacer Type |
Bolt Pattern |
Center Bore |
Bolt/ Stud |
Thread Type |
Width | Notes |
|---|---|---|---|---|---|---|---|---|---|---|
| Ford | Fiesta | 2010-up | DRS | 4/108 | 63.3 | Stud | 12×1.5 | 10.0mm | Front Only, 18 | |
| Ford | Focus | Typ DAW | 2000-05 | DRS | 4/108 | 63.3 | Stud | 12×1.5 | 10.0mm | 18 |
| Ford | Focus | 2006-07 | DRS | 4/108 | 63.3 | Stud | 12×1.5 | 10.0mm | 18 | |
| Ford | Focus S | Sedan, Coupe | 2008-11 | DRS | 4/108 | 63.3 | Stud | 12×1.5 | 10.0mm | 18 |
| Ford | Focus SE | Sedan, Coupe | 2008-11 | DRS | 4/108 | 63.3 | Stud | 12×1.5 | 10.0mm | 18 |
| Ford | Focus SEL | Sedan, Coupe | 2008-11 | DRS | 4/108 | 63.3 | Stud | 12×1.5 | 10.0mm | 18 |
| Ford | Focus SES | Sedan, Coupe | 2008-11 | DRS | 4/108 | 63.3 | Stud | 12×1.5 | 10.0mm | 18 |
| Ford | Focus SVT | Typ DAW | 2000-05 | DRS | 4/108 | 63.3 | Stud | 12×1.5 | 10.0mm | 18 |
| Ford | Focus Wagon | Typ DNW | 2000-04 | DRS | 4/108 | 63.3 | Stud | 12×1.5 | 10.0mm | 18 |
1. Gather Tools
To properly measure your wheel gap you will need a few simple tools:
- Measuring device with millimeter units
- Straight edge–Yard stick or similar
2. Check Your Gap
- Place a straight edge flush with the face of the wheel and tire combination. Make sure the straight edge touches the tire in two spots to keep the straight edge even with the tire.
- Use the measuring device to measure from the inside of the straight edge to the inner fender lip. (see diagram)
- Make sure that the measurement is taken at the point where the wheel and tire is closest to the fender. For instance, on a car with a large amount of negative camber the tire and wheel may be closest at the front or rear edge of the fender.
Installation
1. Check Parts
Make sure that you have the correct part numbers, accessories–bolts, nuts, studs–and that you have the required tools.
2. Remove Wheels
This step should be performed by a qualified auto mechanic in accordance to manufacturers guidelines. Follow TRAK+ installation instructions in Step 3. Repeat for each remaining wheel.
3. Installation Tips
Make sure to review the installation tips listed below for the TRAK+ Wheel Spacer series that you are having installed.
- Remove wheel and press out wheel studs.
- Replace stock wheel studs with new longer H&R Wheel Studs.
- Place TRAK+ Wheel Spacer on hub of car (over the new studs) making sure that the spacer is fully seated and flush with the hub.
- Place wheel onto the new studs and firmly seat against wheel spacer.
- Fasten wheel with original nuts. Carefully hand turn nuts making sure that they spin in easily so as to not cross-thread.
- Repeat step 5 with the remaining nuts.
- With hand wrench, snug up the nuts in a star pattern.
- Before fully tightening, spin the wheel and tire to check for any noise or interference.
- Tighten the wheel nuts in a star pattern with a torque wrench set to wheel manufacturers specifications.
Fast Shipping and Professional Packing
Because of our long-standing partnership with UPS, FedEx, DHL as well as a range of other top global carriers we are able to offer a variety of shipping options. Our warehouse personnel are well trained and will be able to pack the items according to our exact and precise specifications. Prior to shipping, your goods will be thoroughly examined and safely secured. Every day, we deliver to thousands of customers across multiple countries. The fact that we are dedicated to becoming the largest online retailer in the World is evident. We have distribution centers as well as warehouses located in Europe as well as the USA.
Note: Orders with more than one product are assigned a particular processing time based on the individual product.
We will inspect each and every one of the items ordered before shipping. The majority of orders will be delivered within 48 hours. The delivery time will be between 3 and 7 working days.
Returns
Stock is dynamic. It's not completely managed by us, since we're involved with several organizations, such as the factory and our storage. The levels of stock can change at any given time. It is possible that you will not receive your order once it has been placed.
Our policy is for 30 days. If it's been more than 30 days since you bought the item and we're unable to offer you a complete refund or exchange.
The item you purchase must be in its original packaging and not be used. The item must be in its original packaging.
Related products
Wheel & Brakes
Centric Premium 278mm Vented Front Brake Rotor – Ford Transit Connect 2010-2013 Centric
Wheel & Brakes
Hawk Performance HP Plus Front Brake Pads – Ford Focus Duratec 2005-2007 Hawk Performance
Wheel & Brakes
Goodridge G-Stop Stainless Steel Brake Line Kit 4 Line Kit – Ford Mustang 2015-2018 Goodridge
Wheel & Brakes
Goodridge G-Stop Stainless Steel Brake Line Kit 4 Line Kit – Ford Focus 2012-2015 Goodridge
Wheel & Brakes
Hawk Performance Blue Front Brake Pads – Ford Focus Duratec 2005-2007 Hawk Performance
Wheel & Brakes
Centric 253mm Solid Rear Brake Rotor – Ford Focus SPI/16v Zetec/Duratec 2.3L/Fiesta ST Centric
Wheel & Brakes
Centric 258mm Vented Front Brake Rotor – Ford 8v SPI/16v Zetec/2000-2004 Duratec 2.3L Centric
